ToolWorks
Start Free

Help

Round Inspections

A round inspects every matching asset at a location in one pass: for example, the monthly check of every fire extinguisher in a building. Instead of opening one inspection per extinguisher, the inspector works through one list with a row for each asset, and the round produces one report for the whole location. Each asset still gets its own result and history.

💡 Rounds or single-asset inspections? Use a round when many similar assets at one site are checked the same way, on the same visit. Use a single-asset inspection schedule when one asset has its own inspection, such as a forklift's annual service.


Overview

PartWhat it isWhere
Round checklistWhich assets are in the round, and what to check and record on eachChecklists, as a checklist of kind Round
Round scheduleWhich location the round covers, who does it, and how oftenThe round checklist's Assignments tab
RoundOne inspection at one location: a header, one row per asset, and a sign-offInspections on the web, Me → Inspections on mobile
Asset resultsEach asset's pass, fail, or not inspected, kept in that asset's historyThe asset's Inspections tab

A round covers its location and every location below it. A round at "Main Building" includes the extinguishers on "Floor 1" and "Floor 2" when those are sub-locations of it. Vehicles and retired assets are never part of a round.

A typical setup:

  1. Create a round checklist, for example from the Monthly Extinguisher Round starting point.
  2. Schedule it on each site, or start a round when you get there.
  3. The inspector works through the assets, on the web or with the mobile app, and submits.
  4. Review the report and follow up on failures.

Create a Round Checklist

  1. Go to Checklists and create a new tool checklist.
  2. Choose the kind Round.
  3. Choose a starting point: Blank Round, or Monthly Extinguisher Round for a ready-made extinguisher check.
  4. Choose the assets, then set up the asset section as described below.
  5. Save.

A round checklist has a header (for example, the date and weather), one asset section that becomes the list of assets, and a sign-off. You can add header and sign-off sections as on any checklist. The asset section can't be removed.

Like other checklists, a round checklist can have certificate requirements.

Choose the Assets

Under Assets in this round, choose which assets the round covers, for example Category equals Fire Extinguishers. You can filter on category, tool name, or a list of barcodes.

You don't choose a location here. The location is picked when a round is started or scheduled, so one checklist can serve every site.

📝 Changing a checklist: Saving a change, including to the asset filter, creates a new version of the checklist. A round already in progress keeps the version it started with; the next scheduled round uses the new one.

Checks, Fields, and Asset Details

The asset section describes what the inspector sees on each asset's row:

SettingWhat it does
ChecksWhat the inspector checks on each asset, e.g., "Gauge in the green". A failed asset records which checks it didn't meet.
Fields to recordWhat was found today, such as a measured weight. Types: Number, Select List, Yes / No, Date, Text. Ask On every asset or Only on a failed asset, and mark Required if needed.
Asset details to showFacts about the asset shown read-only on its row with their current value: Manufacturer, Model, Serial Number, Model Year, Catalog Number, or a custom field.

A field can fail an asset by itself: a Number field with a Minimum or Maximum fails the asset when the value is outside the range, and a Select List or Yes / No field fails it on the answers you list under These answers fail the asset.

Quick Pass

With Allow quick pass, an inspector can scan an asset and pass it without opening its row. Quick pass turns off while a required field is asked on every asset, because a quick pass can't fill it in. Make the field optional, or ask it only on a failed asset, to turn quick pass back on.


Start a Round

Start a round when you arrive at a site, without a schedule.

On the web:

  1. Go to Inspections and click Start a Round.
  2. Pick the Round checklist and the Location.
  3. Leave the date as today to start the round yourself now. Managers can also pick another inspector or a later date to assign the round instead.
  4. Click Start Round.

On mobile:

  1. Go to Me → Inspections and tap Start a Round.
  2. Pick the round checklist and the location. The location defaults to the one you're looking at, or your own.
  3. Tap Start Round. The round is yours and starts now, even offline.

A round can only be started at a location that has at least one matching asset. If the checklist has certificate requirements, they are checked when the round starts, as for any inspection.


Schedule Rounds

Scheduling rounds needs a plan with recurring inspection schedules. On other plans, rounds can still be started from the Inspections list.

  1. Go to Checklists and open the round checklist.
  2. Open the Assignments tab and click Schedule a Round.
  3. Choose the Location, the Inspector, the start date, and how often it repeats: it does not repeat, or every N days, weeks, months, or years.
  4. Click Schedule.

ToolWorks creates one round per cycle at that location and notifies the inspector. Due dates follow the location's time zone, so a round at a site in another time zone is due on that site's calendar date.

  • A schedule stays on its location. To move it, delete it and create a new one.
  • Deleting a schedule voids its rounds that haven't started yet.
  • Archiving a location voids its rounds that haven't started yet. Rounds already in progress are kept. The schedule creates nothing until the location is back in use.

Conduct a Round on the Web

Open the round from Inspections. The template's header sections come first, then the list of assets, then the sign-off.

Each asset has one row showing its asset details. For each asset:

  • Click Pass, or
  • Click Fail, tick the Checks not met, and answer any fields asked on a failed asset. Tick Critical: take this asset out of service when it must not be used, or
  • Choose Not inspected and a reason (see Not Inspected).

Add a comment or photo to any row. A failed asset needs a failed check, a failing answer, or a comment.

A row is saved as soon as it's complete, so you can leave and come back later, over several days if needed. A row that is missing a required answer stays on screen with a note and isn't saved until you finish it. The status at the top shows Saving…, All changes saved, or Not saved with Try again.

Use the filters (All, Remaining, Failed, Not inspected) and Find an asset to move through a large round.


Conduct a Round on Mobile

Open the round from Me → Inspections. Assets are listed by sub-location, with a progress bar and counts of passed, failed, and not inspected assets.

Tap an asset to open its row, record the result, and tap Done. Fill in the header fields above the list and the sign-off below it.

Scan and Quick Pass

Tap Scan to find assets by their tag, with the camera, RFID, or an external scanner, as set up in the app.

  • When quick pass is allowed, the scanned asset shows on a card: tap Pass and scan the next tag. The camera stays open.
  • Tap Record details to open the asset's row instead, for example to fail it.
  • An asset that already has a result shows it. Scanning never overwrites a result; tap Change result to change it.
  • If a barcode matches more than one asset in the round (a round can span several sub-locations), pick the right one.
  • An asset that isn't on the phone yet is looked up online. Offline, find it in the list instead.

Pass N remaining passes every asset that has no result yet, after showing how many. Use it only when you have actually checked them.

Working Offline

Rounds work fully offline. Each row is kept on the phone and synced on its own as soon as there is a connection, so a round can be continued on another phone, or on the web, with every row recorded so far.

More than one person can work on the same round: the inspector starts it, and anyone who can conduct inspections at that location can then record asset rows. Only the inspector signs off.


Not Inspected

When an asset can't be checked, record it as Not inspected with a reason:

ReasonUse when
InaccessibleIt's there but couldn't be reached, e.g., a locked room
Not foundIt wasn't where it should be
Out of serviceIt's already out of service
RemovedIt has been taken away for good
OtherAnything else; add a comment

A not-inspected asset stays due. It has no new result until it is inspected, in a later round or anywhere else with the same checklist.

To finish a round with some assets unchecked, use Mark remaining as not inspected. It records every asset without a result as not inspected, with the reason you choose.


Complete the Round

Every asset in the round needs a result (pass, fail, or not inspected) before the round can be submitted. The list of assets is fixed at that moment.

  1. Fill in the required header and sign-off fields.
  2. Click Complete round (web) or tap Complete round (mobile). If assets are left, ToolWorks says how many.
  3. Sign and click Submit round.

Large sites are easier as one round per floor or building: schedule each sub-location separately.


Failed Assets

When a round with failures is submitted:

  • An asset marked Critical is taken out of service. The other assets in the round are not affected.
  • If your account opens maintenance orders for failed inspections, one order per failed asset is opened. It names the location, the asset, and the checks or answers it failed.
  • Administrators get one notification for the round, with the number of failures, not one per asset.

Needs Review

Sometimes a row reaches the server after the round was already submitted, for example when two inspectors share a round and one submits while the other's phone is still offline.

  • If the submitted round had that asset as not inspected, the new result is applied, including any failure.
  • If it agrees with what was submitted, nothing changes.
  • If it disagrees, the submitted result is kept and the round is marked Needs review, with a note of what came in late. Administrators are notified.

A round is also marked Needs review when it reaches the server after its location was deleted or archived.

To clear it, an administrator opens the round on the web, checks the note, takes any action needed, and clicks Mark as reviewed. The mobile app shows the flag and note but can't clear it.


Results and Reports

Open a submitted round to see its counts (expected, passed, failed, not inspected), the failures, and every asset's result. The round report PDF has:

  • A summary with the location, address, and counts
  • A table of every asset with its result, checks, answers, and comment
  • Failure details with photos

You can share the report with a public link, and print a certificate of inspection that lists each asset, as for any inspection.

Under Reports:

ReportHow rounds appear
Inspection ListOne row per asset of each round
Overdue InspectionsOne row per overdue round, naming its location
Expiring InspectionsEach asset whose last round result was a pass

An Asset's Rounds

An asset's Inspections tab lists the rounds that cover it next to its own inspection schedules, as Round at location, with its status, last result, and next due date. Click the row to see the schedule and this asset's results.

An asset is due again when its location's next round is due. If it was marked not inspected, or has no result yet, it stays due until it has a result on or after the round's date.

Record Previous Service

When you start using rounds, assets may already have been inspected outside ToolWorks. Open the round row on the asset's Inspections tab and click Record Previous Service to enter when it was last done. The asset's next due date then counts from that date. It doesn't change rounds already scheduled at its location.


Security & Permissions

ActionWho
Create and edit round checklistsUsers with the Manage Templates right
Schedule rounds, assign a round to someone elseUsers with the Manage Inspection right
Start a round for yourself, record asset rowsUsers with the Field Inspection or Manage Inspection right
Sign and submit a roundThe round's inspector
Clear Needs review, record previous serviceUsers with the Manage Inspection right

Round inspections are available on plans that include compliance features.


Troubleshooting

"No assets at this location match this checklist"

The location and the locations below it have no asset that matches the checklist's filter. Check the asset filter on the checklist, and that the assets are at that location and not retired.

An Asset Is Missing From the Round

Only assets that match the filter at the round's location or below it are listed. Check the asset's category and location. On mobile, an asset added recently may not be on the phone yet; scan it while online, or sync.

Quick Pass Isn't Offered

The checklist has a required field asked on every asset, or quick pass is turned off. See Quick Pass.

The Round Can't Be Submitted

Every asset needs a result, and the required header and sign-off fields must be filled in. Use the Remaining filter to find the assets left, or Mark remaining as not inspected.

No Round Checklists on Mobile

The phone lists the round checklists it had at its last sync. Sync, or check that a round checklist exists under Checklists.


Next Steps

Help